Copyright © 2021 Lumens Digital Optics Inc. All rights reserved.
STEP 3
Align and then carefully slide a full or half-length compatible audio/video unit into
the top/bottom grooves of a free slot. Half-length units are designed with a notch
to prevent them from sliding all the way to the back of the rack chassis. Repeat
this step until all units have been installed.
Note: If fewer than 15 units are being mounted it is strongly suggested to leave empty
space between units that get particularly warm to improve airflow and heat dissipation.
STEP 4
Reattach the top and bottom locking panels by screwing in the 3 thumbscrews on each
until they are tight and
secure
.
Note: Be careful to not overtighten the thumbscrews as this could damage the screw
threads.
STEP 5
Connect DC 12V, 3A
power
supply to the cooling fan system
