No.
Item
Function Descriptions No.
Item
Function Descriptions
1.
LCM
Display Menu and
Information
16
DC IN 12V
DC 12 V power connector
2.
Knob
LCM knob
17
Input1
¡
HDMI Input 1
¡
3G-SDI Input 1
¡
HDMI Passthrough
3
Record
Start/Stop recording
4
Stream
On/Off image streaming
18
Input2
¡
HDMI Input 2
¡
3G-SDI Input2
5
Scene
Switch templates
19
Output
¡
PGM:
Main screen output,
display the recording or streaming
screen and layout
¡
Multiview:
Operation interface
output; display the settings menu
and image management
6
Power
On/Off the device power
7
Single Channel Display a single channel screen
8
PIP
Switch to PIP (picture in
picture)
9
PBP
Switch to PBP (picture by
picture)
20
USB3.0 port
Supports the following
devices:
¡
USB video/audio devices
¡
External storage disk
¡
Keyboard/mouse
¡
LC-RC01 (optional)
controller
10
SWAP
Switch signal channels
11
USB3.0 port
for external storage disk
12
USB3.0 port
for external storage disk
13
USB2.0 port
Can connect to keyboard/mouse
device operation menu
21
Ethernet
Connect to LAN
14
Factory
Reset
Reset all configurations to
factory default settings
22
RS-232/ RS-485
port
Connect to AV control
equipment
15
Restart
Reboot the machine
23
XLR audio in
Connect to a microphone or
audio mixer
24
Line In/ Out
Audio In/Out
4.1 Remove the screws (5 pcs) on the top cover.
4.2 Loosen the following screws.
4.3 Attach your hard drive to the connection cable.
* Please make sure the port and the L-shaped slot of the cable are aligned
before insertion. Do not force the connection to avoid damage to the port.
4.4 Fasten the hard disk to the metal plate with the provided
screws (4 pcs).
* Do not over-tighten the screws to avoid damage to the hard drive. Only
use the screws provided.
A. 2.5" SATA Hard Drive holes
B. 3.5" SATA Hard Drive holes
4.5 Lock the hard drive mounting plate in place and insert the
connection cable.
4.6 Close the top cover to complete the installation.
4.7 Hard drive setting
After installation, you need to log in to the web page and click
Information to format the drive.
Storage Setting > Hard Disk
1.1 Front View
1.2 Back View
1.3 Function Descriptions
13
15
14
12
9
10
11
8
7
6
5
4
3
2
1
External USB device
21
20
19
18
17
16
22
23
24
3.1 Lumens strongly recommends the use of a hard drive (not
supplied) for recording video and audio.
3.2 LC100 supports 2.5"/3.5" SATA hard drives.
3.3 If no hard drive is installed, use a USB disk for external
storage.
XLR
Display
(Program)
Display
(
MultiView)
Router
Power
Cord
Power
Audio Out
USB Control
RS-232
/
RS-485 Control
AV Control
Equipment
Computer
Box
Camera
Document
Camera
IP Camera
Audio In
Video Out
Connecting
to Internet
Video In 1/2
Speaker/ Amplifier
MIC/ Audio mixer
Music Player
5100438-50 APR. 2022
4. Hard drive installation steps
2. Product connection diagram
1. Introduction of Product Functions
3. Precautions Prior to Use
LC100 Installation Guide
www.MyLumens.com
Copyright © Lumens Digital Optics Inc. All rights reserved.
A
B
*Formatting the drive will erase all existing data on the disk
