English -
25
7.8 I would like to turn on/off the lamp
The default of the lamp is
OFF
. When using the
remote control
or
control
panel
:
1. Press [MENU] to enter the setting menu.
2. Press [
] or [
] to select [Display].
3. Press [
] to the [Lamp].
4. Press [
] or [
] to select [Off/Arm lamp/Both Lamps/Head lamp].
5. Press [MENU] to exit.
7.9 I would like to freeze images
1. Press [FREEZE] on the
remote control
to freeze the current image on
the screen. Press again to defreeze.
7.10 I would like to capture images
7.10.1 Capturing and saving images
1. Press [CAPTURE] on the
remote control
or
control panel
to
capture and save images.
You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [Capture] to start capturing continuously,
or press [Capture] again to exit.
To change the quality of captured images, please refer to
7.10.2
Setting the quality of captured images
.
To change the settings of captured images, please refer to
7.10.3
Setting continuous capture
.
7.10.2 Setting the quality of captured images
1. Press [Menu] on the
remote control
or
control panel
to enter the
setting menu.
2. Press [
] or [
] to the [Storage] menu.
3. Press [
] to find [Image Quality].
4. Press [
] or [
] to select among [High/Medium/Low].
5. Press [Menu] to exit.
