background image

 

English 

- 5  

the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at 

his own expense.   

 

FCC Radiation Exposure Statement   

This device complies with FCC radiation exposure limits set forth for an 

uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. 

This equipment must be installed and operated in accordance with provided 

instructions and the antenna(s) used for this transmitter must be installed to 

provide a separation distance of at least 20 cm from all persons and must not be 

co-located or operating in conjunction with any other antenna or transmitter. 

End-users and installers must be provide with antenna installation instructions 

and consider removing the no-collocation statement.   

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that 

may cause undesired operation. 

 

Caution  

Any changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment. 

 

 

EN55022 (CE Radiation) Warning 

This product is intended for use in a commercial, industrial, or educational 

environment. It is not intended for residential use. 

This is a Class A product. In a residential environment it may cause radio 

interference, in which case the user may be required to take adequate measures. 

The typical use is in a conference room, reception room or hall. 

Summary of Contents for DC-W50






























Reviews: