background image

Attention: NE PAS raccorder un câble vidéo au port d’activation d’entrée TTL. 

Bien que le connecteur puisse 

paraître compatible, cette entrée n’est pas conçue pour être contrôlée par un signal vidéo. 

Caution: DO NOT set liquids on the light engine. 

Spilled liquids may damage your light engine. 

Attention: NE PAS placer de liquide sur la source lumineuse. 

Les liquides renversés peuvent endommager la 

source lumineuse. 

Caution: DO NOT drop the light engine. 

It contains glass optical components that could be damaged or misaligned 

by the shock produced by a drop onto a hard surface. 

Attention: NE PAS

 laisser tomber la source lumineuse. Elle contient des composants optiques en verre susceptibles 

d’être endommagés ou désalignés par le choc résultant d’une chute sur une surface dure. 

DISCLAIMER: Lumencor shall not be liable for injury to the user or damage to the product resulting from the 
AURA being used in a way for which it was not intended and in complete disregard for all posted safety 
precautions and warnings. 

AVIS DE NON-RESPONSABILITÉ: Lumencor décline toute responsabilité pour les blessures corporelles ou 
les dommages au produit résultant d’une utilisation du AURA autre que celle prévue et du mépris total de 
toutes les mesures de sécurité et mises en garde a

chées.   

3.  Installation and Operating Instructions

3.1  Contents

All AURA FDM light engines ship with the 
following list of standard components: 
1. AURA FDM light engine, configured with 

solid-state light sources (color channels).  
The output of each source is refined by a 
bandpass filter.  Bandpass filters are installed 
to order according to customer specifications 
and are not user-exchangeable.  The filter 
configuration for each AURA FDM light 
engine is shown on the certificate of 
conformance issued to the customer when 
the light engine is shipped by Lumencor 
(Figure 1). 

2. A 24V/5A (120 W) DC power supply 

(Lumencor part no. 27-10001) 

3. A 6ft AC power cord for the power supply 

(for North American customers, Lumencor 
part no. 29-10002, for UK customers, 
Lumencor part no. 29-10004 and for 
European customers, Lumencor part no. 
29-10005). 

AURA FDM Light Engine Manual

6

Figure 1.

 Specimen certificate of conformance for AURA Light Engine.

Summary of Contents for AURA FDM











Reviews: