INSTALLATION:
•
Approx. 3m length of 240v 3 core rubber cable is supplied with a 3 pin UK mains
plug fitted (H05RN-F
–
may vary).
•
Simply plug the Rock Light into the outdoor waterproof mains socket.
•
Install Bulb as per below.
•
Mount the Rock Light in desired location with ground spike provided (see overleaf).
NOTES:
•
Ensure all cabling is positioned carefully around the edges of the garden and clearly
visible, to avoid damage after installation. Do not bury the cable supplied with this
fitting.
BULB INSTALLATION:
•
Turn off the power supply.
•
Remove the base by unscrewing the 4 x screws.
•
Screw the E27 / ES bulb into the bulb holder
–
DO NOT exceed maximum wattage
or overtighten.
•
Ensure the cables have not become loose when removing the base.
•
Replace the base and secure with the 4 x screws. Do not overtighten or this could
damage the outer shell. If there is damage around the predrilled holes, simply drill
new holes in a slightly different location to ensure the base is fitted securely.
Full LUXROX Range & More Information:
TIP:
As the LUXROX uses a standard E27
bulb, this enables more choice when it
comes to selecting the preferred type of
LED bulb; colour and brightness.
