7
ENG
●
Connect the led lighting system to the power supply. Check that the sockets are installed correctly and
that the safety lock nut is in correct possition. It is important that the connection are properly assembled,
because an incorrect connection can lead to melting of the socket, damage to the cable, power supply or
the LED panel it’self, and in extreme cases it can also cause ignition. Sockets that are damaged, deformed
or incorrectly connected report to the dealer or manufacturer immediately. Do not use lighting with
damaged connectors.
There is no risk of electric shock, because direct current (DC) flows through the connector, but a faulty
connector can cause overheating and also skin burns.
●
If the led lighting system is equipped with an external controller, the power and lighting connectors are
connected in the controller. From the power supply, the connector is connected to the "INPUT" socket on
the controller, and the lighting connector is connected to the "OUTPUT" socket of the controller. The
connectors cannot be mixed because they are different shapes and designs and have special grooves for
positioning. Check that the sockets are correctly installed and that the safety nut is in place.
There is no need for an additional timer in addition to the controller, as the controller can control the
brightness as well as the time intervals expressed in minutes. Further descriptions, guides and related
programs can be accessed and downloaded from the official Lumen-aquatech website.
