ULT20 - User’s manual_rev.A
18
0.0000 Four decimal places
AUTO
Automatic format. Resolution is
adjusted to the displayed value in a
way ensuring the best possible
precision.
Ind.Char
Individual characteristic – enable or
disable the recalculation of the measured
value by the entered
individual
characteristic.
Value Description
Disabled Individual characteristic disabled
Enabled Individual characteristic enabled
Point No
Number of points of Individual
characteristic
2...32
Xn*
Point of individual characteristic –
measured value
-99999...999999
Yn*
Point of individual characteristic –
expected value for Xn measured valued.
-99999...999999
*n – point numberofindividual characteristic from 1 to 32. The number of displayed points depends on the set number
of characteristic.
Table 3
ALARM 1 and ALARM 2
Symbol of
parameter
Description
Scope of changes
Param.Al
Value which controls the alarm
operation.
Value Control
value
(monitored)
ValL
Measured value without scaling
ValInd1
Measured distance after scaling acc. to
individual characteristic no. 1 (PAR1).
ValInd2
Measured distance after scaling acc. to
individual characteristic no. 2 (PAR2) –
additional value.
Temp
Temperature value measured by
measuring head – temperature
compensation.
Time
Current time
Counter
Counter value
Type Al
Alarm type – type of alarm contacts
change (see p. 5.7).
Value Alarm
type
n-on
Normally enabled
n-off
Normally disabled
on
Enabled
off
Disabled
hon
Enabled - manual control.
hoff
Disabled - manual control.
OverLo Al
Lower threshold (control value) of the
change of the alarm contacts state.
-99999...999999
OverHi Al
Upper threshold (control value) of the
change of the alarm contacts state.
-99999...999999
DlyOn.Al
Delay of alarm contacts activation
after alarm event occurrence,
expressed in seconds.
0...900