Lumel RE15, User Manual, Page: 17 / 28

17
5. TABLE OF REGISTERS FOR THE RE15 CONTROLLER
In the RE15 controller data are placed in 16-bit registers.
Bits in the register are numbered from the lowest to the highest one
(b0-b15).
The list of registers are presented in the tabel 1.
Symbols R, W in the Option column signify allowable actions on the
controller data: R-readout, W-writing.
Table 1. Contents of 16-bit registers
Regist. Option Symbol Range Description
address
4000 R,W inpu 0...16 Output type: 0-PT100, 1-PT1000, 2-Ni100, 3-Cu100, 4-J,
5-T, 6-K, 7-S, 8-R, 9-B, 10-E, 11-N, 12-Chromel-copel,
13-resistance 0...400 W ,14-0...20 mA, 15-4...20 mA,
16-0...10V, 17- 0...5V
4001 R,W t_lj 0, 1 0- 2-wire line, 1- 3-wire line
4002 R,W r_lj 0...200 Resistance of the line*10
4003 R,W Conp -1...501 Compensation of cold ends*10, ; values <0 or >500
mean automatic compensation
4004 R,W Lcpp 0, 1, 2 Number of digits after coma (value 2 for linear inputs)
4005 R,W Shjf -999...999 Shift of measured value
1)
4006 R,W spll -999... splH Lower range of the measured value on the main input
1)
4007 R,W splH Spll ...9999 Upper range of the measured value on the main input
1)
4008 R,W J2lo -999... J2Hj Lower range of the measured value on the additional
input
1)
4009 R,W J2Hj J2lo ...9999 Upper range of the measured value on the additional
input
1)
4009 R,W J2Hj J2lo ...9999 Upper range of the measured value on the additional
input
1)
4010 R,W Jnp 0...5 Range of the additional input: 0-0...20 mA; 1-4...20 mA;
2-0...10 V ; 3-0...5 V; 4-0...100 W ; 5-0...1000 W ;
4011 R,W Fjn 0...4 0 - set value ( rsp = inp2 ); 1- extra information
measurement; 2- sum of signals from both inputs;
3 - difference with main input; 4- arythmetical mean
from both inputs
4012 R,W Fjnb 0...3 Function of the binary input: 0-no used binary input;
1- stops the control (control signal=0); 2- switch over
to the manual work, 3- program end; 4- program
stopped on the value counted lately