UDE
75
08
ASSEMBLY INSTRUCTIONS /OPERATION
- Insert the filter bag support into the bore on top of
the filtration housing then, slip the filter bag over the
hook on the filter bag support.
Assembling the collection bag
– Fit the collection bag to the lower part of the
filtration housing and secure in place with the
lower retaining strap.
Assembling the collection hose
– Attach the collection hose to the lower part of
the filtration housing and secure in place with
the hose clamp.
Operation
Woodworking operations will cause dust to
become airborne with the potential to be highly
toxic; we always recommend wearing a face mask
during these operations, as well as ensuring the
area is well ventilated.
Before using your dust collector:
- Learn the function and correct use the on/off
switch.
- Read and understand all the safety instructions
and operating procedures throughout this manual.
Before each use:
- Inspect your dust collector, if any parts are
missing, damaged, bent, or fail in any way, or any
electrical components do not work correctly, turn
off the dust collector and remove the plug from
the mains supply.
- Replace damaged, missing, or failed parts
immediately.
- When cleaning the collection bags, always wear a
dust mask and eye protection.
- Ensure all clamps, collection hose and bags, are
secure.
- Connect the other end of the collection hose to
your machine.
- To start the dust collector; press the green (I)
button.
- To stop the dust collector; press the red (O)
button.
Your dust collector is fitted with a safety NVR
(no volt release) switch. This means that if power
is cut to the dust collector (such as in a power
failure); the motor will not start to run once the
power is returned without the operator following
the above instructions to restart the dust collector.
