The Industrial Series Multi-Tool has six
possible settings that range from ¾” to
2” by ¼” increments. The blades must be
moved to cut a different tenon size.
6
Setting the Blades
Tenon
Size
Max Log
Dia.
Approximate
Blade Offset
0.75”
3.25”
.090”
1.00”
3.50”
.110”
1.25”
3.75”
.130”
1.50”
4.00”
.150”
1.75”
4.25”
.170”
2.00”
4.50”
.190”
Blade Offset
Correct
(smaller tenon)
Correct
(larger tenon)
WRONG
The tenon diameter is variable based on the blade offset. Smaller offset
= smaller tenon, larger offset = larger tenon. Approximate blade offset
(in the table above) is a good place to start, but you will want to test
tenon fit in holes to achieve the correct offset (we recommend writing
the results down).
DO NOT
set the blades beyond 5/16” or the blade
edge will not contact the log and will not cut.
1/8”
1/4”
●
Install and secure the blades with
the Button Head Cap Screws
●
Take care to keep the blade offset
of both blades equal (see below)
●
The top number that is
visible will always be the
size of the tenon cut
