07
Owner’s Manual & Safety Instructions
Rotary Hammer Drill
Operation
:
VARIABLE SPEED CONTROLLED TRIGGER SWITCH
Your tool is equipped
with a variable speed trigger
switch. The tool can be turned “ON” or
“OFF” by
squeezing or releasing the trigger. The speed can be adjusted
from the minimum to maximum
by the pressure you apply to the
trigger. Apply more pressure to increase the speed
and release pressure
to decrease speed.
FORWARD/REVERSING LEVER &TRIGGER LOCK
Your tool is equipped
with a forward/reversing lever and trigger lock located above the
trigger .
This lever was designed for changing rota�on of the chuck, and
for locking the trigger in an “OFF” posi�on to help prevent accidental
starts and accidental ba�ery discharge.
For forward rota�on, (with chuck pointed away from you move the lever
to the far le�. For reverse rota�on move the lever to the far right. To
ac�vate trigger lock move lever to the center off posi�on.
CAUTION
Do not change direc�on of rota�on un�l the tool comes to a
complete stop. Shi�ing during rota�on of the chuck can cause damage to
the tool.
DRILL/HAMMER DRILL SELECTION DIAL
.
FORWARD
REVESRSE
