6.1
Assemble the frame
Note the direction when installing; the LED driver mounting bracket is on top when the fixture is hung.
Note the direction when installing; the driver tray is on top when the fixture is hung.
Connect Frame A and B to
the support frame by pressing
button on frame connector
and inserting into support
frame socket and lock.
Ensure button clicks into hole
socket to lock.
Connect Frame B to
support frame end near
LED driver power output
& dimming female
connectors.
Press button on Frame A
push-click connector to
connect to support frame
and ensure button clicks
into hole socket to lock.
Ensure the driver is secured and flip the fixture over
so the driver is now underneath. Insert the end
of the light bar with the hook into the square
hole in Frame A
Then insert the other end; align the round hole
on Frame B with the light bar’s magnetic end
and insert male pin into female socket.
Ensure magnetic connection is secure.
6.2
Connect the LED light bars
Assemble the rest of the light bars into the fixture frame as shown in the figure above.
Warning! The light bars are shipped with protective plastic covers over the diodes.
Please ensure these protective covers are removed before use!
