![Lumatek LUMLED020 Manual Download Page 11](http://html1.mh-extra.com/html/lumatek/lumled020/lumled020_manual_1947623011.webp)
Warning! Always ensure at least one light bar is connected to the fixture before switching on. The Zeus fixture
has an intelligent LED driver which can increase or decrease power to match the amount of light bars
connected to the system automatically.
Warning! Always wait 20 – 30 minutes for the LED light bars to cool down before handling the fixture.
Warning! Disconnect the LED fixture from mains before performing any maintenance or repairs.
Warning! Do not connect or disconnect the LED fixture under load.
Warning! Do not open or disassemble the LED fixture, it contains no serviceable parts inside. Opening the LED
fixture can be dangerous and will void the warranty.
Warning! Always wait 20 – 30 minutes for the LED light bars to cool down before handling.
Caution! Do not clean the LED fixture with detergents, abrasives or other aggressive substances.
Regularly check the LED fixture for dust or dirt build up. Clean if necessary. Contamination may cause
overheating and decreased performance.
Clean the outside of the LED fixture using a dry or damp cloth.
Regularly check the cables of the LED fixture to ensure it is undamaged.
7. PRECAUTIONS WHEN USING THE LED FIXTURE
9. STORAGE AND DISPOSAL
8. INSPECTION, MAINTENANCE AND REPAIR
Store the LED fixture in a dry and clean environment, with an ambient temperature of -25ºC to 55ºC.
The product must not be discarded as unsorted municipal waste but must be collected separately for the
purpose of treatment, recovery and environmentally sound disposal.
10. WARRANTY
Lumatek warrants the mechanical and electronic components of their product to be free of defects in materi-
al and workmanship if used under normal operating conditions for a period of five (5) years from the original
date of purchase. If the product shows any defects within this period and that defect is not due to user error or
improper use Lumatek shall, at its discretion, either replace or repair the product using suitable new or recondi-
tioned products or parts. In case Lumatek decides to replace the entire product, this limited warranty shall
apply to the replacement product for the remaining initial warranty period, i.e. five (5) years from the date of
purchase of the original product. For service; return the product to your shop with the original sales receipt.
info@lumatek-lighting.com
www.lumatek-lighting.com
Summary of Contents for LUMLED020
