2
• Do not immerse in water or other liquids.
• Do not use abrasive cleaner. Clean with a damp cloth.
• Do not operate the unit in environments that exceed 40°C, under -30°C, or with high humidity.
Assembly Instructions
1. Disconnect power before installing or servicing. If the power disconnect switch is out of sight, lock it in the open position and tag it to prevent
unexpected application of power.
2. This fixture is designed for wall mounting and requires a flat vertical surface approximately 3" wide and 5" high. Four 3/8" bolts are supplied for
mounting.
Only fixture 52YK83 is designed for post mounting.
3. Carefully loosen the bolt and nut located on the short arm. Attach U-Shaped bracket to the short arm with a bolt and a nut. Make sure that the bolt &
nut is tight and firmly holds the support bracket and arm assembly.
4. The tooth gears attached to the U-Shaped bracket allow the tilt adjustment of the fixture head. Use the handle to tilt the fixture head to your desired
angle.
5. Wiring: Fixture is wired with a 3-wire cord set. All wiring should be in accordance with local codes and ordinances. Connection to local power should
be made using the cord set on the fixture, and plugged into a properly grounded receptacle. Ensure that the receptacle is located in a manner that the
cord remains above the dock light arm.
Grainger International, Inc. Lake Forest, IL60045
Printed in China 01/17
