Lumantek SIRCH, Installation Manual, Page: 6 / 10

Select the ‚1. Frequency‛ menu with up/down cursor keys and push [Enter] button, the
Frequency menu will be displayed on LCD, as below.
Set the desired frequency using the cursor keys.
Use up/down cursor keys to change the frequency, left/right cursor keys to move the unit.
Level Control
RF output level settings are as follows.
Push [Enter] button from front panel. Main menu will be displayed on LCD, as below.
Select the ‚2. Level‛ menu with up/down cursor keys and push [Enter] button, the Level
menu will be displayed on LCD, as below.
Set the desired level using the cursor keys.
Use up/down cursor keys to change the Level in 0.5dB step.
IPv4 Setting
IPv4 settings are as follows.
Push [Enter] button from front panel. Main menu will be displayed on LCD, as below.
39.0dBmV
[29 ~ 56dBmV / 0.5]
Level
-> 1. Frequency
-> 2. Level
-> 3. IPv4 Setting
-> 4. Version
602.000MHz
[50 ~ 870MHz / 1kHz]
Frequency
-> 1. Frequency
-> 2. Level
-> 3. IPv4 Setting
-> 4. Version