3. Cable Connecting for DMM402 and UPC 231
Lumantek Co., Ltd.
13
3. Cable Connecting for DMM-402 and UPC-231
3-1. 1 Channel ETI Streaming Case (1*DMM-402 and 1*UPC-231)
Connect I
1.
2
C cable from card
j
(DMM-402) to card
k
(UPC-231).
You could connect to whether right or left I
2
C socket of UPC-231
The left side ADDRESS jumper must leave as factory default.
2.
Also, do not touch jumper #1 and #2 which are blocked by tube. You could use jumper #3 or #4.
When one UPC-231 is mounted, you have to plug in jumper at ADDRESS #3.
(Jumper #4 is open)
Then, connect to 4-pin power cable which we supplied.
3.
3-2. 2 Channel ETI Streaming case (1*DMM-402 and 2*UPC-231)
When you install 2 UPC-231 PCI cards with 1 DMM-402 PCI, do not set same ADDRESS
1.
on both UPC-231 PCI cards. For example, plug in one jumper at ADDRESS#3 of upper
UPC-231 and plug in another jumper at ADDRESS #4 of down UPC-231.
For the ADDRESS #1 and #2 , do not use them.
I
2.
2
C cable from card
k
(DMM-402) may be interfaced with I
2
C socket of any UPC-231
(card
j
or card
l
). Then connect any right or left connector. For example, if I
2
C cable is
interfaced between card
k
(DMM-402) and card
l
(UPC-231) then another I
2
C cable should
be interfaced between card
l
(UPC-231) and card
j
(UPC-231) as above picture.
I
2
C I
2
C
#4
#2
#3
#1
Power
j
DMM-402
k
UPC-231
ADDRESS
ADDRESS
(Blocked)
Factory Default
(DO NOT USE)
I
2
C I
2
C
k
DMM-402
l
UPC-231
j
UPC-231
I
2
C
#4
#2
#3
#1
ADDRESS
ADDRESS
(Blocked)
Factory Default
(DO NOT USE)
Factory Default
(DO NOT USE)
Power
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
