AMIGO™ 8-VSB Modulator
>> 9
User Manual
6. AMIGO™ Operation
Basic Button Function
LCD Display Window
• Set Menu and Function
• Basic Information is shown
Move Curser and change value
• Move Setting Value (number) Curser to left
• Move Setting Value (number) Curser to right
• Increase Setting Value, Move Curser to Up
• Decrease Setting Value, Move Curser to Down
Set Value
Exit Menu
1. Power On
Bellowing LCD Display may appear when power is supplied.
- LumanTek 2.0.7-
RF : 579 Mhz, 0 dBm
Ts: 0.00Mbps
Current Setting Center Rf & Display real-time rate of the TS
If Rate is 0 then LCD Display show TS: No Input!!, and show Alarm signal.
2. Starting Menu
* 1. Rf Ch/Freq.
2. RF Power
3. Input Port
4. Spec Inv.
After initialization, press
[SET]
Button. Menu will be shown.
Main Menu are RF Ch/Freq, RF Power, Input Port, Spec Inv, Ref 10Mhz, Linear, and Non-
lin.
Select Menu by Up / Down Buttons and Press SET Buttons.
1. RF Freq : RF output signal setting
2. RF Power: RF output level setting
3. Input Port : Input port setting
4. Input Format : Input format setting
5. Ref 10Mhz : 10Mhz Signal setting ( except # 75Ω)
6. Linear : Set up a linear displacement
