![Lumag BSF15 Operator'S Manual Download Page 10](http://html1.mh-extra.com/html/lumag/bsf15/bsf15_operators-manual_1947366010.webp)
5
Stump Grinder
• Keep the working area clean and well lit.
• Do not operate the stump grinder in the presence of flammable liquids, gases
or dust.
• Keep children and bystanders away while operating the stump grinder. Keep the
area free of all distractions.
• Only responsible, properly instructed indivuals should operate this machine.
• Inexperienced operators must always be carefully supervised.
• Do not expose stump grinders to rain or wet conditions.
• Stay alert, watch what you are doing and use common sense when operating
a stump grinder. Do not use a stump grinder while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating any stump grinders may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
• Always wear earplugs to protect your ears.
• Do not start the engine until the machine is in the cutting position next to
the stump.
• Do not overreach. Keep proper footing and balance at all times. This enables
better control of the stump grinder in unexpected situations.
• If devices are provided for the collection of dust extraction, ensure these are
connected and properly used.Use of these devices can reduce dust related
hazards.
• Check stumps to be removed for embedded nails, wire, metal fence posts and
other metallic objects and for rocks or other buried impediments which may
become dangerously thrown or cause unexpected machine movements when hit
by the cutting wheel.
• Make sure that all shields and guards are in place and are in good condition prior
to operating the machine. Check cutting wheel for damage or missing teeth and
replace as necessary.