Android Requirements
____________________________________________________________________________
Software
• Android Jellybean OS 4.0 or later
• 3/4G or Wifi connection
• Bluetooth 2.1+
Hardware
• Micro USB port
Lumafit LED Indicator
___________________________________________________________________________
The Lumafit indicator LED gives information on the status of the device.
Charging
Place your sensor into the micro USB lead included in the box,
and plug the charger in any USB port. When charging, the LED
will stay on constantly for the duration of the charger until full, at
which point it will automatically turn off.
Powered On / Ready to Connect
Pressing the on button for a short tap (around one second) will
toggle on and off of the Lumafit. When turned on the LED will
initially flash fast for 2 seconds and then flash slowly once every
2 seconds. This indicates the Lumafit is ready for connection.
Discoverable Mode
Pressing the on button for a long press of 6 seconds will put the
Lumafit into discoverable mode.
This will allow smartphones and tablets to discover the Lumafit
during a Bluetooth search. When put in discoverable mode on
the LED will initially flash fast for 2 seconds and then flash more
slowly with a
double flash
every 2 seconds. The Lumafit will
stay in discoverable mode for 5 minutes or until it is turned off.
Connected
When the Lumafit is powered on and a smartphone or tablet connect to the device the LED
stays on constantly.
Low Battery Indicator
When your battery is below 10%, your sensor will alert you with a fast blinking LED.
