Version 180417-1508
Technical Bulletin
Special Cube Setup: Wi-Fi + Audio
Wi-Fi Connectivity
Hardwiring a surveillance camera is always the best solution. Since it is not always possible, we present this guide
to wireless surveillance installations.
Based on our testing, we recommend no more than 2 cameras per dedicated access point, and there must be no
more than 2 streaming devices on the dedicated access point. If you opt for 1080p resolution, drop your bit rate to
2.5Mbps and use 15 fps or lower. For 720p resolution, drop your bit rate to 1.5Mbps and use 15 fps or lower.
Your Luma Wi-Fi Cube camera connection must be at 80% signal strength with -67dBm minimum to have reliable
streaming video.
Please use the table below as a guide to setup your Luma Wi-Fi Cube camera on a Wi-Fi network.
Image
FPS
Minimum Wi-Fi Performance
Expected
Result
Araknis Access Point Connected
Device Signal Strength
Luma 300 Cube
Signal Strength
1080p
30
-30 dBm to -50 dBm
100% – 96%
Okay
1080p
30
-51 dBm to -70 dBm
95% – 85%
Okay
1080p
30
-71 dBm or worse
< 80%
Poor
1080p
20
-30 dBm to -50 dBm
100% – 96%
Good
1080p
20
-51 dBm to -70 dBm
95% – 85%
Good
1080p
20
-71 dBm or worse
< 80%
Poor
720p
20
-30 dBm to -50 dBm
100% – 96%
Good
720p
20
-51 dBm to -70 dBm
95% – 85%
Good
720p
20
-71 dBm or worse
< 80%
Poor
720p
30
-30 dBm to -50 dBm
100% – 96%
Good
720p
30
-51 dBm to -70 dBm
95% – 85%
Good
720p
30
-71 dBm or worse
< 80%
Poor
Disclaimer
This list is provided as a public service. The information herein is provided “as is” without warranty of any kind
in terms of correctness, accuracy, reliability, obsolescence, or otherwise. We do not warrant, guarantee, or make
any representations regarding the use, or the results of use, of this information; and we are not responsible for any
damages incurred by use of this information.
Audio Guide
Once your Wi-Fi cube is activated and on the network, you can set up audio with the built-in microphone.
The audio feature is used for general audible activity levels. It is not designed to capture specific conversations with
complete clarity. Audio clarity depends on the distance, volume, ambient noise, and audio configurations.
Setting Up Audio
Log in to the camera interface and click on the
Configuration
icon.
Navigate to the
Video/Audio
. It opens at the Video tab.
