background image

 

www.LumaComfort.com 

I

MPORTANT 

S

AFETY 

I

NFORMATION

 

These  instructions  are  not  meant  to  cover  every  possible  condition 
and situation that may occur. Please read all instructions before using 
this misting fan. Failure to carefully read all instructions may result in 
possible electric shock or fire hazard, and will void the manufacturer’s 
warranty. 

1.

 

Use  this  misting  fan  only  as  instructed  in  this  owner’s  manual.  Other  uses  may 
cause electric shock, injury or fire. 

2.

 

Close supervision is required if this fan is used near children or pets. 

3.

 

To protect against electric shock, do not immerse this fan or its plug and cord in 
water. 

4.

 

If the fan is being transported or will not be in use, disconnect it from the power 
supply by tightly gripping the fan’s plug and pulling it from the  power outlet.  Do 
not disconnect the power supply by pulling on the fan’s power cord. 

5.

 

Avoid contact with any of the misting fan’s moving parts. 

6.

 

Place the misting fan on a level surface. 

7.

 

This misting fan is intended to fit into a  matching receptacle. Under 
no circumstances should the grounded plug be altered in any way. An 
improper connection can result in electric shock. 

8.

 

If possible, avoid using extension cords with this misting fan. If an extension cord is 
absolutely necessary,  do not use more than one extension cord  and do not use a 
single extension cord to operate more than one fan. 

9.

 

Do not insert objects or allow fingers to enter into the fan head, as this may cause 
electric shock or bodily injury. Do not block or tamper with the misting fan while it 
is in operation. 

10.

 

Do  not  place  the  fan  near  curtains,  drapes,  or  any  other  materials  that  can  get 
caught in the misting fan’s grills. 

11.

 

Do not run the power cord under mats or carpeting, and do not cover the power 
cord with runners. Arrange the power cord away from room traffic or where it can 
be tripped over. 

12.

 

Do  not  operate  this  misting  fan  in  the  presence  of  flammable  substances  or 
explosives. 

13.

 

Do not place the fan near an open flame or cooking/heating appliances. 

14.

 

If the fan will not be in use, empty the tank of any remaining water.  

15.

 

If the fan’s plug or power cord is damaged, do not attempt to repair 
the components yourself. Please contact Luma Comfort’s customer 
service  hotline  at  1-866-737-6390  or  have  the  fan  examined  by  an 
authorized service provider. 

Summary of Contents for MF24B
















Reviews: