Version 160128-1126
Technical Bulletin
Using the thumb notch on the top of the
unit, gently slide the cover about an inch to
the rear of the unit, then lift it up. Once it is
off, set the lid aside in a safe place where it
won’t get scratched.
Toward the front of recorder is the mounting
bar, a ventilated strip of metal. One hard
drive is already installed. Disconnect the
SATA and power cables from that hard drive.
Remove the Mounting Bar
Remove the two black screws that hold the
mounting bar in place. They are on the
exterior of the unit, one at each side of the
recorder.
