2
510 Series Analog PTZ Camera
Inspection
Inspection
Ensure that the device is in good condition and all the assembly
parts are included. If the product does not function properly,
please contact technical support. Do not disassemble the camera
for repair or maintenance.
Box Contents
}
Camera with arm mount
}
24VAC power adapter with two wire leads
}
Steel cable lanyard with two carabiners
}
Mount coupling with lanyard hook
}
Hex wrench
}
(4) expansion screws
Required Equipment
Aside from the contents of this box, you must provide
}
Small slot-head screwdriver
}
CC-TV tester (recommended)
Preparation
}
Ensure that your recorder has the very latest firmware.
Use
OvrC to update the firmware, or consult your DVR manual.
}
Make sure that all equipment is powered off during
installation.
}
Ensure the wall is strong enough to withstand three times the
weight of the camera and the mount.
We recommend installing with RG-59 or RG-6 cabling with two-
wire power (the power supply is included). This provides better
performance over distance than traditional category cable with
baluns. For more details, see the product page at SnapAV.com.
