Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 115 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 115 Jump to Web Interface
Email
This section sets the recorder up to send email alerts when desired.
Note that these settings may not be enough: you may need to change
your email security settings to allow your recorder to send email
alerts. Refer to our online guide or the documentation provided by
your email provider for further information.
Be sure to click Save when you are done with the page.
Authentication Settings
Click the Authentication box at the top of the page if you are
required to do so by your email provider.
Enter the user name and password for the email account that will be
used to send the alerts. This is needed to log in to the outgoing email
server. You may also need to adjust your account security settings on
the provider side.
For full details on this, including using two-step verification, see
“Setting Up Email Alerts” on page 16.
Customize the Email
Refer to the tech note on our website or to your email provider’s
documentation to enter the proper SMTP server and port, and to see
if you need to enable an encrypted connection. You may also need
to adjust your email account settings on the provider side.
Interval sets how often the recorder sends updates with attached
snapshot images to the email address. It is enabled when you enable
Attached Image (below).
Attached Image sets the recorder to include a photo of the incident
in the email notification it sends.
The sender and sender’s address boxes let you edit whom
the message appears to be from. Set the sender to read
Luma
Surveillance Recorder or something similar.
Define Recipients
You can define up to three people (or distribution lists) to receive
these email alerts, and customize how they receive them. Select
a recipient number in the Choose Receiver menu, then enter that
person’s name and email address in the fields immediately below.