Lull 0160003882, Owner'S/Operator'S Manual

Page: 25 / 200

Operation
23 Model 944E Origin 3/04
Operation
1. Check seat belt for damage. Check for frayed or cut seat belt webbing,
damaged buckles or loose mounting brackets. Make any necessary repairs
before operating the vehicle.
2. Check all four tires and rims for damage. Check for proper tire pressure,
add air if required. Observe the condition of each tire looking specifically for
punctures, cracks, cuts, gouges, bulges or any other damage. Check the
condition of each rim for bent flanges or any other damage. Make any nec-
essary repairs before operating the vehicle.
3. Check and add engine oil if required. This procedure is explained in greater
detail on page 114.
4. Check and add transmission oil if required. This procedure is explained in
greater detail on page 128.
5. Check the cooling system overflow bottle for coolant. Add coolant if
required. This procedure is explained in greater detail on page 110.
Remove any debris blocking the radiator cooling fins.
6. Check the hydraulic oil level sight glass and add hydraulic oil if required.
This procedure is explained in greater detail on page 125.
7. Visually inspect the batteries for cleanliness. Check terminals for corrosion.
Check the cable connections to ensure proper tightness.
8. Walk around the vehicle and check for oil leakage as well as damaged or
missing parts. Make any necessary repairs before operating the vehicle.
9. Check ALL lighting systems (if so equipped) for proper operation.
10. Adjust rear view mirrors as required to obtain proper field of vision to the
rear.
11. Test the back-up alarm and horn for proper operation.
12. Check condition of cab glass (if so equipped), looking for cracks or other
damage.
13. Visually check the condition of the air conditioner condenser (if so
equipped). Remove any debris from the cooling fins of the air conditioner
condenser located at the top rear of the cab. Clean the fins as needed.
Pre-Operation Inspection
Courtesy of Crane.Market