LBCA4 Page 14 of 15
Maintenance
– Water Tank Cleaning
Warning:
To ensure the cleanness of the mist, the product should be cleaned before each use.
Before cleaning the product, stop it and unplug the power, otherwise there
would be risk of electric shock.
Do not use high-pressure water jets to clean this product.
If the power line is damaged, ask service agent or professionals to replace it.
Volatile liquid such as thinner or gasoline will damage the appearance, please use
a soft cloth with neutral detergent to clean this product.
Protection for Control panel
After adjusting the switches, please close the cover of the control box and tighten
the screws as shown, so as to prevent erosion of rainwater or PVC panel aging
caused by sun exposure.
Water Tank Cleaning
Simple cleaning ( Suitable for the cleaning of each use)
Rotate the two nuts on the control panel; push the panel inwards; clean the inner tank
with long-handled brush; then open the drain valve to drain off the waste water; wash
the tank with clean water; then close the drain valve again; Ensure the water level
sensor is firmly fixed; close the control box.
～
There is abnormal noise when the
device is running
～
There is smoke or unpleasant smell
～
There is water leakage
～
Leakage protector is tripping
～
Power cord is abnormally hot and
become abnormally soft.
Stop it and disconnect the
power plug
