Ludlum Measurements 239605, Manual

Page: 37 / 50

Model 3-IS & 3-IS-1 Technical Manual
Section 9
Ludlum Measurements, Inc. Page 9-1 October 2010
Recycling
udlum Measurements, Inc. supports the recycling of the electronics
products it produces for the purpose of protecting the environment and
to comply with all regional, national and international agencies that
promote economically and environmentally sustainable recycling systems.
To this end, Ludlum Measurements, Inc. strives to supply the consumer of its
goods with information regarding reuse and recycling of the many different types
of materials used in its products. With many different agencies, public and
private, involved in this pursuit it becomes evident that a myriad of methods can
be used in the process of recycling. Therefore, Ludlum Measurements, Inc. does
not suggest one particular method over another, but simply desires to inform its
consumers of the range of recyclable materials present in its products, so that the
user will have flexibility in following all local and federal laws.
The following types of recyclable materials are present in Ludlum Measurements,
Inc. electronics products, and should be recycled separately. The list is not all-
inclusive, nor does it suggest that all materials are present in each piece of
equipment:
Batteries Glass Aluminum and Stainless Steel
Circuit Boards Plastics Liquid Crystal Display (LCD)
Ludlum Measurements, Inc. products which have been placed on the market
after August 13, 2005 have been labeled with a symbol recognized internationally
as the “crossed-out wheelie bin” which notifies the consumer that the product is
not to be mixed with unsorted municipal waste when discarding; each material
must be separated. The symbol will be placed near the AC receptacle, except for
portable equipment where it will be placed on the battery lid.
The symbol appears as such:
Section
9
L