Using Your Soul
®
Headphones
Once you have found the proper fit, the audio cable has been connected, batteries have been Installed and you have selected the Hi/Lo
output you are ready to start enjoying the full range and quality of your Soul® headphones.
1. Place headphones over your ears. Note: the headphones have an “L” for Left and “R” for Right indicators on the inside bottom portion of the headband. It is
very important to place the headphones on your head correctly to get full sound benefit and enjoy your listening experience.
2. Make sure that the volume is all the way down to zero.
3. Turn your device off.
4. Plug the 1/8” (3.5mm) plug into the headphone jack.
5. Power Up your device.
6. Select the music or movie you wish to hear or view.
7. Slowly increase the volume level until you find the safe and appropriate listening level for you.
8. Your Soul® SL300 Headphones include “Active Noise Cancelling” technology. This feature reduces the ambient noise around you for a more pleasurable
listening experience. To activate this feature slide the switch on the left back portion of the headphone to the “on” position. A blue LED light will Indicate
that the “Active Noise Cancelling” feature is on. Your SL300 Headphones will still work even if the batteries have been depleted; however, you will need
to replace the batteries to continue using the “Active Noise Cancelling Feature”. Please remember to turn switch to the off position to prevent any
unnecessary drain of the batteries.
9. Another additional feature of your Soul headphones is the Illuminated light ring around the Soul Logo on the outer portion of the ear cups. On the
inner left portion of the headband is a power button to turn this feature on and off.
!
Caution
Use your headphones responsibly. Exposure to excessively loud noise can cause Noise Induced Hearing Loss (NIHL).
Never put headphones on when unit is at full volume as it may cause permanent damage.
8
