This appliance may become warm under normal operating conditions.
Recycle according to WEEE regulations.
1. SYSTEM Status LED. Green indicates correct operation, red indicates
a system error requiring urgent further investigation.
2. DOWN Push-button. Press this control to navigate the LCD menu.
3. ENTER Push-button. Press this control to navigate the LCD menu.
4. UP Push-button. Press this control to navigate the LCD menu.
5. AF MON BNC connector for monitoring of the input to the
modulator (baseband MPX spectrum).
6. RF MON BNC connector for monitoring of the RF output. Output
level will be the RF output level attenuated by approximately 40dB. Not
to be used for measurement of harmonics.
7. RF OUT 'N' Socket. Connect a matched, pre-tested antenna system
with a return loss of >14dB to this socket. Ensure all parts of the feeder
and antenna system are rated for 100W or above.
Controls and Connectors
