5. ROUTER DESIGN
5.7
Removing from the DIN rail
DIN holder is suitable for DIN rail according to EN 60715 standard only. Default position
of CKD2 holder, which is used for mounting the router on a DIN rail, is shown in the following
figure:
Figure 8: Default position of DIN holder
For removing from the DIN rail it is necessary to lightly push upward the router so that the
top part of the CKD2 holder hitched to the DIN rail get out of this rail and then fold out the top
part of the router away from the DIN rail.
Figure 9: Removing from the DIN rail
13
23-05-16
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
w
w
w
.luco
m.d
e
inf
o@lucom
.de
