FISHFINDER
13
1.The FF1108-CWLA loses signal in wireless User Mode.
If the FF1108-CWLA, while in Wireless user mode, is not able to get an RF signal from the
Wireless sonar sensor, the display will stop updating and the NO SIGNAL will be displayed
after several seconds. Whenever reception is lost or the Wireless sonar sensor pulled out
from the water for more than a few seconds, the will be displayed until the
Wireless sonar sensor is placed back in the water and reception is regained.
1) The Wireless sonar sensor uses line -of- sight wireless technology. If objects are placed
between the FF1108-CWLA and the Wireless sonar sensor, reception may be lost.
2) The Wireless sonar sensor depth range is 3 to 147 feet (0.7 to 45 meters). Erratic readings
may occur in water that is shallower than 3 feet. In addition, because of the nature of sonar,
this product is not intended for use in swimming pools or small enclosed bodies of water.
3) Reeling the Wireless sonar sensor too fast can cause loss of signal and the screen will freeze.
4) Check the buoyant balance between the Wireless sonar sensor and your tackle; over 0.2
ounce will submerge the Wireless sonar sensor, causing signal loss.
5) The Wireless sonar sensor may not obtain its maximum RF distance of 200 feet unless the
water is smooth. Waves or chop may reduce the RF range significantly.
2.When in very shallow water, I get gaps in the bottom reading and inconsistent digital depth
indication.
The Wireless sonar sensor will work reliably in water 3 feet (0.7 meters) or deeper.
7. Trouble
