manualshive.com logo in svg

Lucky Star p4a845d, User Manual

Discover how to make the most of your Lucky Star p4a845d with our comprehensive user manual. This manual provides step-by-step instructions, troubleshooting tips, and in-depth explanations for a seamless user experience. Download your free copy now from manualshive.com and unlock the full potential of your Lucky Star p4a845d.

Share
Download
background image

 

 

21

2-5-5  IDE1 and IDE2  

 

 

The IDE connectors are used to connect IDE devices such as Harddisks and CD-
ROM drives to the motherboard. Each connector constitutes an IDE channel, each 
channel accepts 2 IDE devices, one Master and one Slave. The IDE 1 connector is 
also known as the primary channel, IDE 2 is the secondary channel. Therefore the 
primary Master is the IDE device connected to IDE1 as Master, the primary Slave 
is the IDE device conneced to IDE 1 as Slave. Jumpers on the IDE device 
determine Master and Slave settings. Your harddisk or CD-ROM should have a 
sticker with jumper settings. Make sure that you set these jumpers correct. Please 
use the following advice as reference: 

 

If you have only device connected to an IDE connector, always set it as 
Master.  

 

If you have one HDD and CD-ROM in your system, then connect the HDD 
to IDE1 as Master, and the CD-ROM to IDE 2 as Master 

 

If you have one Harddisk and one CD-ROM connected to the same IDE 
connector set the HDD to Master and the CD-RAM to Slave. 

 

 

IDE CONNECTOR

IDE1

IDE2

Summary of Contents for p4a845d











































































Reviews:

No comments

Related manuals for p4a845d

Brands by name

Popular brands

Load more brands