VT8371 System Board 27
3.
Insert the RMAMs through the bottom of the motherboard and attach them to
the retention mechanism.
4.
Fasten up the screws on the retention mechanism to tighten up retenion
mechanism and RMAM. Check if all the piece parts are fastened tightly.
5.
But the CPU in the RM kit. (Push the CPU horizontally into the RM kit.)
Lock for
AMD K7
***To push the switch on the CPU, and CPU
will be loosen from the lock of RM kit.
***To use screw driver or any tool alike to
draw this and hold. At the same time, softly
pull one side of the CPU out. Then, pull the
other side and CPU will be loosen this way.
