6MZX1
I440ZX Main Board
50
IDE Secondary Master PIO/ IDE Secondary Slave PIO
This feature detects your secondary master hard disk device.
:Auto (default)
:Mode 0,1,2,3,4
On-Chip Primary PCI IDE : select use chip support primary PCI IDE.
: Enabled (default)
: Disabled
On-Chip secondary PCI IDE:select use chip support secondary PCI IDE.
: Enabled (default)
: Disabled
USB Keyboard Support
:Enabled (select “Enabled” if the system uses a USB keyboard)
:Disabled (default)
Init Display First—to decide which video function (AGP or PCI) to detect
first
: AGP (default)--- the system will detect the onboard “AGP” function first and
then the PCI-interface VGA card .
: PCI Slot--- the system will detect PCI-interface VGA card and then the onboard
“AGP” function.
POWER ON FUNCTION
Item
Setup Procedure
Special note
KB power on
password
1.
Enter password
5 spaces allowed.
2. Confirm password: key in the
password to confirm again.
1.
System can only be turned on through
password.
2.
When turning on the system, the user must
press “Enter” after keying password.
Hot key power
on
12 options from
"CTRL+F1…CTRL+F12." The
user may choose either of them by
"page up" or "page down."
The system can be turned on either by hot key
or pushing case power on button.
Mouse left
Mouse left
(PS/2 mouse only)
The system can be turned on either by PS/2
mouse (left key) or pushing case power on
button.
Mouse right
Mouse right
(PS/2 mouse only)
The system can be turned on either by PS/2
mouse (right key) or pushing case power on
button.
Button only
Case button
The system can be turned on by case button.
