• This product contains electric components and has a lifetime.
We recommend inspecting and replacing the product regularly as over time while it is active and lit up, it could result in the deterioration of its parts
due to the heat emitted. Not only would the electrical efficacy decrease it could potentially be a safety issue.
• We recommend replacing the adhesive sheet once per month.
• If the product is used over long periods of time without inspection, smoke, fire or electric shock may occur.
If placed horizontally
Surface mounted by hook or magnet
How to use
The Luci Mushitora XIA can be installed in different manners.
If placed vertically
Open one side
To make it stand, please open the covers to its maximum
(There should be a click sound when pulled out)
*Please check if the loading capacity of
the mounting location is sufficient.
*The closed side of the silicone cover
should be rested on the surface.
Open both sides
Do not install the product facing downward by hook or magnet.
• When replacing adhesive sheet, make sure to do so after unplugging the cable.
This may result in electric shocks or burns.
• When you hold the adhesive sheet, avoid touching the adhesive area.
• If you do touch the adhesive area, wash the touched area thoroughly with soap or detergent.
• If mounted on surface (wall mounting) by hook
Place the holes E (Hole for hooking) on a hook.
• If mounted on surface (wall mounting) by magnets
Stick the body on a metal surface using the attached magnets on the back of the body.
To avoid any unexpected drops, do make sure the body is stuck on the surface firmly.
How to replace adhesive sheets
Remove the silicone cover from the body.
Install new adhesive sheet. Please refer to “How to use
⓷
(Prepare the adhesive sheet)” in this manual.
Push the slits on the silicone cover inwards and remove the adhesive sheet.
1. Place thumbs on ● parts
2. Turn the adhesive sheet side towards
a trash box, push thumbs in and the
adhesive sheet will drop from the silicone cover.
• Use only the provided and recommended adhesive sheet (Item no.: LMT-S-D or LMT-S-D-3). If other adhesive sheets are used, the performance
of the fixture will be impaired.
• As a guideline, we recommend replacing the adhesive sheet once per month. During periods where there are a lot insects, replace the adhesive
sheets frequently and when many insects are caught on the adhesive sheets, replace it as soon as possible. We recommend replacing the
adhesive sheets once per month as the adhesive performance decrease over time due to dust particles, even when there are no insects caught.
*The used adhesive sheet can be thrown away as a general disposal item. However do follow the way specified by the local government.
When replacing the adhesive sheet, make sure to do so after unplugging the cable.
This may result in electric shocks or burns.
Maintenance and inspection
While cleaning or providing maintenance to the product, make sure to do so
after unplugging the cable. This may result in electric shocks or burns.
Inspection method
Cleaning method
• Check if the light-emitting unit lights up normally.
• Check if there is are any abnormal smells, sound or heat.
• Check if there are cracks, tears or damages on any parts and its joints.
• Wipe the light-emitting unit with a soft cloth.
• If the product is very dirty, wipe the contaminated area softly with a wet cloth first and wipe it with a dry cloth after.
• Do not wipe with volatile substances such as thinner or benzene. It may cause discoloration, deterioration or damage.
Luci Mushitora XIA
User’s Manual