OPTICAL SPECTRUM ANALYZER User Manual
II.)
General
4
OPTICAL SPECTRUM ANALYZER User Manual --- Rev 1.1 --- 2012/11
www.luceotec.com
GENERAL
SAFETY INFORMATION
CLASSIFICATION
The OPTICAL SPECTRUM ANALYZER module consists of a metal chassis that is directly connected
to earth when plugged into the X-BERT chassis.
SAFETY INSTRUCTIONS
The following safety instructions must be observed whenever the unit is operated, serviced, or
repaired. Failure to comply with any of these instructions or with any precaution or warning contained
in the user’s manual is in direct violation of the standards of design, manufacture, and intended use of
the unit. Luceo Technologies GmbH assumes no liability for the customer’s failure to comply with any
of these safety requirements.
BEFORE INITIALIZING AND OPERATING THE UNIT
Inspect the unit for any signs of damage, and read the user’s manual thoroughly.
Install the unit as specified in the
Getting Started
section.
