VARIABEL OPTICAL ATTENUATOR User Manual
III.)
Installation
13
VARIABEL OPTICAL ATTENUATOR User Manual --- Rev 1.1 --- 2012/11
www.luceotec.com
Warning
Do not use the unit outdoors.
To prevent potential fire or shock hazard, do not expose the unit to any
source of excessive moisture.
STORING AND SHIPPING
To maintain optimum operating reliability, do not store the unit in locations where the temperature falls
below -40 °C or rises above 70 °C. Avoid any environmental condition that can result in internal
condensation. Ensure that these temperature and humidity requirements can also be met whenever
the unit is shipped.
CLAIMS AND REPACKAGING
Immediately inform Luceo Technologies GmbH and, if necessary, the carrier, if
The content of the shipment is incomplete
The unit or any of its components are damaged or defective
The unit does not pass the initial inspection
In the event of carrier responsibility, Luceo Technologies GmbH will allow for the repair or replacement
of the unit while a claim against the carrier is being processed.
RETURNING SHIPMENTS TO LUCEO TECHNOLOGIES GMBH
Luceo Technologies GmbH only accepts returns for which an approved Return Material Authorization
(RMA) has been issued by Luceo Technologies GmbH sales personnel. This number must be
obtained prior to shipping any material to Luceo Technologies GmbH. The owner’s name and address,
the model number and full serial number of the unit, the RMA number, and an itemized statement of
claimed defects must be included with the return material.
Ship returned material in the original shipping container and packing material. If these are not
available, packaging guidelines are as follows:
Wear an anti-static wrist strap and work in an ESD controlled area.
Cover the front panel, if applicable, with a strip of cardboard.
Wrap the unit in anti-static packaging. Use anti-static connector covers, if applicable.
Pack the unit in a reliable shipping container.
Use enough shock-absorbing material (10 to 15 cm or 4 to 6 in on all sides) to cushion the unit
and prevent it from moving inside the container.
Seal the shipping container securely.
Clearly mark FRAGILE on its surface.
Always provide the model and serial number of the unit and, if necessary, the RMA number on
any accompanying documentation.
Ship the unit only to the address given on page
Fehler! Textmarke nicht definiert.
of this
document.