background image

Warranty Repair Card
Limited Warranty

W-2

WaveLAN/EC-S User’s Guide

Limited Warranty

W

Lucent Technologies extends a limited warranty from date of 
purchase of:

Thirty-six (36) months for  WaveLAN hardware products

Twelve (12) months for WavePOINT access points

Upon proof-of-purchase Lucent Technologies shall at its option, 
repair or replace the defective item at no cost to the buyer.

Defective items shall be returned to the dealer/distributor:

Freight prepaid.

Accompanied by a copy of proof-of-purchase.

Accompanied by a filled out Warranty/Repair card. 

This warranty is contingent upon proper use in the application for 
which the products are intended and does not cover products 
which have been modified without the seller’s approval or which 
have been subjected to unusual physical or electrical demands or 
damaged in any way.

NOTE:

THIS WARRANTY CONSTITUTES THE SOLE AND 
EXCLUSIVE REMEDY OF ANY BUYER OR SELLER’S 
EQUIPMENT AND THE SOLE AND EXCLUSIVE 
LIABILITY OF LUCENT TECHNOLOGIES IN 
CONNECTION WITH THE PRODUCTS AND IS IN LIEU 
OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR 
STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY 
IMPLIED WARRANTY OF MERCHANTABILITY OF 
FITNESS FOR A PARTICULAR USE AND ALL OTHER 
OBLIGATIONS OR LIABILITIES OF LUCENT 
TECHNOLOGIES.

Summary of Contents for WaveLAN/EC-S























































































































































Reviews: