3-46
The Stinger® Compact Remote ATM DSLAM Getting Started Guide
Enclosure and Component Installation
Status lights
Table 3-6. ADSL 48-port Annex A LIM status lights
Note
Detailed physical and configuration information for the 48-port low power
ADSL LIM is included in the
Stinger ADSL Annex-A LIM Guide for LIMs with ADSL2+
Capability
.
Cooling unit status lights
The Stinger CR cooling unit is shown in Figure 3-35.
Figure 3-35. The Stinger CR cooling unit
Light
Color
Indication
STBY
Orange
The module is a designated spare. The control
module switches traffic to the module if one of
the other modules fails.
ACTIVE
Green
The module or port is fully operational and no
errors have been detected.
FAULT
Orange
The module failed to pass its POST.
BYPASS
Orange
The module is in bypass mode. (The module
redundancy feature is activated.)
PORT
Green
The local and remote ends of the physical line
have achieved frame synchronization, and the
local end of the link has achieved cell delineation.
If the light is not illuminated, the port is inactive.
COMPACT REMOTE
COOLING UNIT STATUS
INTERNAL
EXTERNAL
BLINKING GREEN: INITIALIZING, GREEN: ACTIVE, RED: FAULT
Locking
screw
Status lights
Enclosure ventilation fan
power connector