Programming
4-14
Issue 1 August 1998
Automatic VMS Cover (#310)
If you assign this feature for an extension, intercom and transferred calls are
transferred to the voice messaging system when the called person does not
answer by the fourth ring (or by the number of rings specified within the
communications system VMS Cover Rings feature).
To change the Automatic VMS Cover setting for an extension to Assigned as
indicated on Form B2:
1. Press
#310
.
2. Enter the number of the first extension to which Automatic VMS Cover is to
be assigned.
3. Press
D
until the display reads
1 Assigned
.
4. To program another extension, press
n
or
p
until the extension
number shows on the display.
5. Repeat Steps 3 and 4 for each extension to which Automatic VMS Cover is
to be assigned.
Group Call Distribution (#206) -
Option 1
Use this procedure to specify the outside lines for which Automated Attendant
Service is required.
To assign VMS-AA lines specified on Form A, Page 1, Line Coverage, to Hunt
Group 7:
1. Press
#206
.
2. At the
Group:
prompt, press
7
.
3. At the
Line:
prompt, enter the first VMS-AA line specified in the Line
Coverage column of Form A, Page 1.
4. Press
D
until the display reads
1 Assigned
.
5. To program another line, press
n
or
p
until the appropriate line
number displays.
6. Press
D
until the display reads
1 Assigned
.
7. Repeat Steps 5 and 6 for each VMS-AA line on Form A.
