Lucent Technologies PARTNER Endeavor 362, Programming And Use Manual

Page: 192 / 407

Doorphone Extension (#604 and #605)
5-93
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a doorphone extension:
1. Press
f 0 0 s s # 6 0 4
for
doorphone 1 (or
# 6 0 5
for doorphone 2) at extension 10 .
2. Enter the doorphone extension number. For example, to identify extension
16 as a doorphone extension, press
16
—or press
r
to unassign
an existing doorphone extension.
3. Select another procedure or exit programming mode.