VMS Hunt Schedule (#507)
Description
This feature applies only if you have a voice messaging system.
This System Programming procedure determines whether the outside lines
assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only
during Day operation (Night Service is off), or only during Night operation (Night
Service is on). This feature affects only the Automated Attendant Service of the
voice messaging system.
Related Features
Group Call Distribution (#206)
to assign lines to
Hunt Group 7.
associated with the voice messaging system hardware to Hunt Group 7.
If you set the VMS Hunt Schedule for Day Only or Night Only, you must use
to program a Night Service button for
extension 10.
Valid Entries
1 = Always
✔
2 = Day Only
3 = Night Only
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To change the VMS Hunt Schedule setting for the voice messaging system’s
Automated Attendant Service:
1.
Press
f
0
0
s
s
#
5
0
7
at extension 10
or 11.
2.
Press
D
until the appropriate value displays.
3.
Select another procedure or exit programming mode.
5-192
VMS Hunt Schedule (#507)
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
