Station Lock (F21)
Description
This feature is available only on system and standard touch-tone phones.
This feature lets users enter a four-digit code on their telephone dialpad to “lock”
their extension. Later, the user enters the identical code to unlock the extension.
Station Lock helps to prevent unauthorized people from making outside calls
from these extensions. You should recommend that users lock their extensions
whenever they leave their desks for extended periods of time.
Related Features
All outside numbers except Marked
and
numbers on the
Emergency Phone Number List (#406)
locked extensions.
If a user forgets the code, use
extensions.
Station Lock returns to the status (on/off) it was in before a power failure
occurred or
was used.
Considerations
You can program a Station Lock button on a system phone. A button with
lights is recommended, so the user can quickly determine whether or not the
extension is locked.
Users can enter a different code each time they lock their extension.
A user at a locked extension can make intercom calls and can receive
intercom and outside calls.
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a Station Lock button:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press
f
2
1
.
5.
Program another button for this extension or exit programming mode.
Station Lock (F21)
5-165
Summary of Contents for PARTNER Advanced Communications System Release 1.0
Page 6: ...iv...
