Lucent Technologies MERLIN Plus Release 2, System Manual

Page: 106 / 337

Administration Code
Other Numbers/Buttons
Feature
*71
Assign voice terminals to Group Page group 1 the intercom numbers
the intercom numbers
the outside line buttons
Assign voice terminals to Group Page group 2
*72
Assign lines that can be answered by System Answer
*75
Set number of rings before an ASA feature picks up a call
*76
ASA feature number (1-4) and number
of rings (0-9)
plus message option
0 = no message
1 = “Please hold”
2 = “Please hold. Your call will be
answered momentarily”
NOTE: You can also append message
1 or 2 to the call forwarding
message modified with the
*50 code.
Choose a message to be played with System Answer.
*77
Assign an alternate attendant position
*79
an intercom number of the voice
terminal
a 2-digit month, a 2-digit day of the
month, and a 2-digit year
*80
Set the date for the Call Report and System Feature Report
feature
*81
a 2-digit hour, a 2-digit minute of the
hour Set the time for the Call Report and System Feature Report
feature
*82
*83
*84
an intercom number
Set the control unit jack for the Call Report feature
Set the minimum call duration for the Call Report feature 0 through 9 (minutes)
0 = no calls reported
1 = only outgoing calls reported
2 = outgoing and incoming calls
reported
an intercom number
an account number
Set the type of calls that are printed on the call report
*85
Set the control unit jack for the System Feature Report
*88
Assign System Speed Dial codes to account numbers for
the Account Number Entry feature
Enable or disable a person from changing programmed
features at his or her voice terminal
*89
the intercom number
*90
Assign System Speed Dial codes to outside telephone
numbers system speed dial code and telephone
number digits
a * plus the telephone number digits
Assign System Speed Dial codes to outside telephone
numbers that are private (only the dial code is printed on
the call report)
(continued)
3-50 Quick Reference Guide to Administration Codes