MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-595
Night Service
3
Console Display/Instructions
Additional Information
PC
11. Return to the System Programming menu.
Select
Exit
four times.
Night Service
3
The procedures in this section cover how to program the following optional Night
Service features:
■
Night Service Group Assignment
■
Night Service with Outward Restriction
■
Night Service with Time Set
■
Night Service with Coverage Control
Night Service Group Assignment
3
Use this procedure to assign extensions and calling groups to a Night Service
group for coverage after hours.
A maximum of eight Night Service groups can be assigned (no more than one for
each operator position assigned). Any number of extensions can be assigned to a
Night Service group, and an extension can belong to more than one group.
A calling group can also be assigned to a Night Service group. This applies only to
Release 2.0 or later.
Beginning with Release 4.1 this option allows the system manager to assign
outside lines to Night Service groups in addition to extensions and calling groups
for coverage after hours.
Any number of outside lines can be assigned to a Night Service group. Each
outside line can belong to more than one group.
Summary: Night Service Group Assignment
3
Programmable by
System Manager
Mode
All
Idle Condition
Not required
Planning Form
9a, Night Service: Group Assignment
Factory Setting
Not applicable
Valid Entries
Not applicable
