MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 594
System Renumbering
automatic reconciliation program runs at 3:00 a.m. The reconciliation program is
disabled in Integrated Solution III version 1.2.
Feature Interactions
4
0
Timed Flash
4
0
See
‘‘Recall/Timed Flash’’ on page 511
Authorization Code
Authorization codes are associated with logical IDs, not extension
numbers. If extensions are renumbered and the logical IDs for the
extensions change, the authorization codes may be reassigned to
different extensions.
Automatic Route
Selection
In Hybrid/PBX mode, the Automatic Route Selection (ARS) access code
(factory setting is 9) can be renumbered.
CTI Link
When the system dial plan changes, CTI applications (Release 5.0 and
later systems) must use the new extension numbers in any requests. The
Passageway Telephony Services security database should be updated to
reflect permissions for the new extension numbers and to clear
permissions for the old ones. Some CTI applications may also require
updating.
Direct Station
Selector
The beginning extension number for each page is assigned through
system programming. The factory settings are as follows: Page 1 button
begins with Extension 0, Page 2 button begins with Extension 50, and
Page 3 button begins with Extension 100.
Group Calling
Extensions for calling groups (the factory settings: 770–791, 7920–7929)
are assigned and can be renumbered through system renumbering.
Integrated
Administration
System renumbering can be done only through system programming on
the programming console or SPM. Integrated Administration never sends
system numbering information to the system.
Ringing/Idle Line
Preference
In Key and Behind Switch modes, the Idle Line Access code (factory
setting is 9) can be renumbered.
