■
Programming System Features
PARTNER Systems:
PARTNER II and PARTNER Plus system buttons should be
assigned as follows; 1, 2, 3, and 4 are line or feature buttons
(for a PARTNER system, buttons 1 through 4 are line only):
1
2
3
PSTAT
O N
M S G
RANGE BATT
4
MERLIN Systems:
■
■
■
■
■
■
It is recommended that you use MERLIN 206/410/820 systems
installed with Feature Package 2 with your wireless phone.
You must disable the Voice Announce feature. This phone does
not have a speaker function.
You should not be assigned to a paging group.
To program the Ringing Option feature, use the “arrow” and
“rectangle” indicators in the display as the equivalent of red
and green LEDs, respectively.
For MERLIN II system users, if you program an Auto Intercom
button, idle line preference must be set to intercom.
If any of your incoming lines has the call waiting feature,
program the Recall feature on one of the programmable
buttons and press it before you pickup a waiting call. You can
dial #50 before you pick up a waiting call on the following:
MERLIN 206/410/820 systems only with Feature Package 2,
and all MERLIN Plus, MERLIN II, and MERLIN 1030/3070
systems. Pressing the
[On/Off]
button will disconnect the call.
27
