Lucent Technologies MAX 3000, Installation And Basic Configuration Manual

Page: 188 / 189

Index
T
MAX 3000 Installation and Basic Configuration Guide Index-9
switched channel, specifying 6-8
,
6-9
Sys Options window 3-27
Syslog parameter 4-12
Syslog reporting
configuring MAX 4-12
configuring UNIX host 4-12
purpose with MAX unit 3-28
syslog.conf
file 4-12
system
event logging 3-25
name, administrator, and location information 4-11
options, displaying 3-27
slot number 3-4
status windows 3-25
uptime, displaying 3-26
system administration
Diagnostic-mode CLI 3-18
–
3-21
resources in MAX manuals 7-6
–
7-7
software loading 3-20
superuser (administrative) permission 4-10
–
4-11
tools 3-28
System menu 3-4
System profile 4-10
–
4-12
system slot 3-4
T
T1/PRI lines
basic configuration 6-10
–
6-17
MAX, connecting 2-8
provisioning for inband signaling A-1
provisioning switch A-2
status window, verifying physical connections 6-16
testing 6-24
T1/PRI model
back-panel items 1-2
cable specifications C-6
CSU requirements C-5
digital modems, number supported 2-2
drop/insert port 1-2
,
1-6
drop/insert ports 1-7
Ethernet, connecting 2-8
hardware installation procedures 2-1
–
2-7
interface specifications C-5
leased 1-2
,
1-6
point-to-point T1 1-7
slot and menu correspondence 3-4
T1 line, connecting 2-8
WAN connector specifications C-12
t3pos
(terminal-server command) 3-17
Target Util parameter 5-7
tcp
(terminal-server command) 3-16
TCP-Clear parameter 5-6
TE (Terminal Equipment) conversion to NT (Network
Terminating) B-9
–
B-11
telephone company line options 5-5
telnet
(terminal-server command) 3-16
,
5-10
,
6-6
Telnet Host Auth parameter 5-11
Telnet Mode parameter 5-10
Telnet password, setting 4-3
,
4-6
–
4-8
Telnet PW parameter. 4-8
Term Rate parameter 4-11
Term Type parameter 5-10
terminal adapters 5-8
terminal emulator, usage 3-2
terminal mode (terminal server) 5-9
,
5-10
terminal server
commands 3-14
–
3-17
dial-in call handling 5-8
–
5-9
dial-out calls 5-12
–
5-13
DO menu access 3-12
enabling 5-9
immediate host access 5-11
menu access 5-11
security 5-9
,
5-10
terminal mode 5-10
usage 3-12
–
3-13
terminal type, terminal server 5-10
Termserv (DO command) 3-12
test
(terminal-server command) 3-14
testing connections
hardware requirements 2-1
LAN procedure 6-6
WAN procedure 6-24
testing, POST 2-11
Time parameter 4-11
tloadcode
(diagnostic command) 3-20
Toggle (DO command) 3-12
Toggle Scrn parameter 5-11
traceroute
(terminal-server command) 3-15
Transit # parameter 5-5
transmitted frames, displaying 3-26
trestore
(diagnostic command) 3-20
troubleshooting
Diagnostic-mode CLI 3-18
–
3-21
lights, interpreting 2-10
,
2-11
TS Enabled parameter 5-9
TS Idle parameter 5-4
,
5-7
tsave
(diagnostic command) 3-20
TSIdleMode parameter 5-4
,
5-7