Initial System Administration
3-26
Issue 2 December 1996
Subtask 14K: Run the Switch Names Audit
This task is required only if the system uses DS integration. Otherwise, skip to
Task 14L: Check Alarm Status.
The Switch Names audit uploads the names-to-extensions database from the
switch. The Switch Names audit could take from 5 minutes to an hour, depending
on the size of the database.
1. With the cursor on the DEFINITY AUDIX command line, type audit
switch-names and press
.
The system displays the Switch Names Audit screen.
2. Press the
(F3) function key to begin the audit.
3. Press the
(F3) function key again to have the audit run in the
background.
NOTE:
Because of the possible long duration of this task, complete the
remaining administration tasks (Task 14L: Check Alarm Status, Task
14M: Check Hardware Status, Task 16: Add Tape, and Task 17:
Check the Status of the Switch Names Audit) and then check the
status of this audit as described in Task 17: Check the Status of the
Switch Names Audit.
4. Proceed to Task 14L: Check Alarm Status.
RETURN
ENTER
ENTER
Summary of Contents for Definity Audix System
Page 14: ...About This Document xiv Issue 2 December 1996...
Page 22: ...Prerequisites 1 8 Issue 2 December 1996...
Page 96: ...Initial System Administration 3 38 Issue 2 December 1996...
Page 170: ...Option Settings B 20 Issue 2 December 1996...
